JeepParts
My Garage
My Account
Cart
OEM 2000 Jeep Cherokee Coil Springs
Strut Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Coil Springs found
2000 Jeep Cherokee Coil Spring, Rear Part Number: 52089102
Product Specifications- Other Name: Spring; Coil Spring, Rear; Coil Springs; Spring Rear Coil
- Position: Rear
- Item Weight: 7.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089102
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Cherokee Coil Spring Part Number: 52088181
Product Specifications- Other Name: Spring; Coil Springs; Spring, Front Coil; Spring Front Coil
- Item Weight: 9.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088181
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Cherokee Spring Part Number: 52088105
Product Specifications- Other Name: Coil Spring Front; Coil Springs; Coil Spring; Spring, Front Coil; Spring Front Coil
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088105
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Cherokee Coil Spring Part Number: 52001122
Product Specifications- Other Name: Spring; Coil Springs; Spring, Front Coil; Spring Front Coil; Spring, Front
- Item Weight: 8.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52001122
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Cherokee Spring Part Number: 52001114
Product Specifications- Other Name: Coil Springs; Spring, Front Coil; Spring Front Coil; Spring, Front
- Item Weight: 6.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52001114
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Cherokee Coil Springs Parts and Q&A
- Q: How to Maintain and Repair Coil Springs on 2000 Jeep Cherokee?A: For service and repair of the coil spring and jounce bumper, you must first raise and lift the vehicle, making sure to support it below the axle with a hydraulic jack. Get the wheel and tire assemblies out and cut the axle away from the front propeller shaft. After that, take out the lower suspension arms mounting nuts and bolts from the axle, along with the stabilizer bar link and shock absorber. Release the track bar from the rail bracket mount and take off the drag link from the pitman arm. Let the axle down until the spring clears the upper mount, then take out the coil spring clip and then the spring, followed by pulling the jounce bumper from its bracket. To install the bumper, put it into the mount, set the coil spring on the axle pad, add the spring clip and bolt and tighten the bolt to 21 Nm (16 ft. lbs.). Put the axle up to its highest point, with the spring sitting in the upper mount, then attach the stabilizer bar links and shock absorbers to the axle bracket and install the track bar on the body rail bracket. Put the lower suspension arms on the axle and line up the bolts, leaving them finger tight, then mount the front propeller shaft to the axle. Fix the wheels and tires back onto the car, take away the floor jack supports and send the vehicle down. Tightening the nuts on the lower suspension arms should equal 115 Nm (85 ft. lbs.).
Related 2000 Jeep Cherokee Parts
2000 Jeep Cherokee Track Bar
2000 Jeep Cherokee Wheel Hub
2000 Jeep Cherokee Axle Beam Mount
2000 Jeep Cherokee Axle Pivot Bushing
2000 Jeep Cherokee Axle Shaft Seal
2000 Jeep Cherokee Axle Support Bushings
2000 Jeep Cherokee Bump Stop
2000 Jeep Cherokee Coil Spring Insulator
2000 Jeep Cherokee Control Arm Bumper
2000 Jeep Cherokee Leaf Spring Bushing
2000 Jeep Cherokee Sway Bar Bracket
2000 Jeep Cherokee Sway Bar Link