How to Ensure Proper Functioning of a Starter Motor on a 2000 Jeep Cherokee?

To repair the starter motor, disconnect the negative of the battery cable, and raise the vehicle. Remove the screws of the starter motor, and disconnect the battery positive cable and solenoid connector. After removing the starter, place it back, reconnect the solenoid and tighten all of the connections before putting the vehicle down and connecting the battery.

OEM 2000 Jeep Cherokee Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Starter motors found

View related parts
2000 Jeep Cherokee Starter Part Number: RL041012AC
Product Specifications
- Other Name: Starter - Engine; Starter Motor
- Replaces: 56041012AC
- Item Weight: 7.40 Pounds
- Item Dimensions: 10.4 x 6.6 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: RL041012AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Limited, SE, Sport | 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee Starter Part Number: 56041013AF
Product Specifications
- Other Name: Starter - Engine; Starter Motor
- Replaces: 56041013AE, 56041013AB
- Item Weight: 9.10 Pounds
- Item Dimensions: 10.5 x 6.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041013AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- SE | 2.5L L4, 4 Cyl 2.5 L GAS

2000 Jeep Cherokee Starter Motor Parts and Q&A

Q: How to Ensure Proper Functioning of a Starter Motor on a 2000 Jeep Cherokee?
A: To repair the starter motor, disconnect the negative of the battery cable, and raise the vehicle. Remove the screws of the starter motor, and disconnect the battery positive cable and solenoid connector. After removing the starter, place it back, reconnect the solenoid and tighten all of the connections before putting the vehicle down and connecting the battery.