Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2000 Jeep Cherokee Submodels:
Briarwood, Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
2000 Jeep Cherokee Weather Strip Parts and Q&A
Q: How to Maintain the Rear Door's Primary Weather Strip on 2000 Jeep Cherokee?
A: Before working on the rear door primary weather strip, first take off the B-pillar upper trim, inner scuff plate, B-pillar lower trim and upper door opening trim. Pull on the seal and take it off the door. The under seal should be installed by starting from the door sill center line, working your way upward around the edge of the door and onto the flange. Work your way up around the entire door opening to make sure the weather strip is in place. When the weather strip is fitted, install the upper trim around the opening of the door, the inner sill, the lower trim panel underneath the B-pillar and the upper trim around the B-pillar surface.