How to Maintain a Coolant Temperature Sensor on 2001 Chrysler Voyager?

Drain the cooling system below the thermostat level in order to service the Engine Coolant Temperature (ECT) Sensor. Disconnect the electrical connector of the sensor and remove the sensor. Install the new sensor tightening to 7 Nm (60 inch lbs.), reconnect the electrical connector and refill the cooling system.

OEM 2001 Chrysler Voyager Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2001 Chrysler Voyager Coolant Temperature Sensor Part Number: 5269870AB
$63.79 MSRP: $86.70
You Save: $22.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Sender Unit, Coolant Temperature; Temperature Sensor; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.9 x 1.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5269870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2001 Chrysler Voyager Coolant Temperature Sensor Parts and Q&A

Q: How to Maintain a Coolant Temperature Sensor on 2001 Chrysler Voyager?
A: Drain the cooling system below the thermostat level in order to service the Engine Coolant Temperature (ECT) Sensor. Disconnect the electrical connector of the sensor and remove the sensor. Install the new sensor tightening to 7 Nm (60 inch lbs.), reconnect the electrical connector and refill the cooling system.