OEM 2001 Chrysler Voyager Fuel Injector

2001 Chrysler Voyager Fuel Injector Parts and Q&A

• Q: How to Effectively Service and Repair Fuel Injectors on 2001 Chrysler Voyager?

  A: First thing to do is take off the fuel rail to access and fix the fuel injectors. Unplug the injector wiring connectors from each injector and place the fuel rail assembly so you can easily reach every injector. Push and rotate the injector and then pull it free from the fuel rail while keeping the clip attached. Look at the injector O-ring and change it if it shows any damage. If you plan to use the injector, cover its tip with a protective cap and update the clip if it's damaged. Apply a small amount of clean engine oil to the rubber O-ring just before putting in a new injector. Gently push the open end of the clip into the top of the injector and hold the receiver cup so that its edge fits properly into the clip's side slots. Place the injector's top part over the bottom of the fuel rail receiver cap, being careful not to harm the O-ring. Follow this method with the other injectors before connecting all the wires again.