Other Name: Lighter - Cigar Lighter; 12 Volt Accessory Power Outlet, Center; Cigarette Lighter Element, Front.; Lighter Assembly; Knob & Element for Cigar Lighter; Cigarette Lighter.
Position: Front
Replaces: 4685536AB, 5ZN46DX9AA, 5ZN46LXHAA
Item Weight: 0.50 Pounds
Item Dimensions: 1.4 x 1.3 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4685536
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2001 Dodge Caravan Submodels:
Base, C/V, ES, Ec, LE, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, BATTERY EV (EV/BEV)
Other Name: Outlet; 12 Volt Accessory Power Outlet Housing, Front; Center; Cigarette Lighter Socket.; Lighter Socket; Power Outlet Base; Cigar Lighter Base; Serviced Without Cap.
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2001 Dodge Caravan Submodels:
Base, C/V, ES, Ec, LE, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, BATTERY EV (EV/BEV)
2001 Dodge Caravan Cigarette Lighter Parts and Q&A
Q: How to Service the Cigarette Lighter on 2001 Dodge Caravan?
A: Before starting the service, cut the connection to the battery by disconnecting its negative terminal. See where the retaining bosses are placed inside the cigarette lighter base. Put the external snap ring pliers, with their tips facing the bosses, over the snap ring and squeeze them to loosen the bosses from the base. Pull the base out of the mounting ring by gently rocking the pliers or else use a specialized tool for this. First, detach the base wires and keep the base to the side and then get rid of the light ring and its wire. When you place the mounting ring, put the wires through it and line up the cap and ring with the key at the 9 o'clock position on the instrument panel before confirming the ring is installed. Attach the wires to the base so that the base's alignment rib is at the 11 o'clock position to fit in the groove of the ring. Push the base down into the socket until it clicks, turn on the element and add the cover to the cigarette lighter.