How to Replace the Outer CV Boot on 2001 Dodge Intrepid?

To replace the CV boot outer, remove the halfshaft assembly, discard clamps and slide off the boot. Clean the area and remove the snap ring and inspect for wear. A new boot and outer CV joint assembly with added grease and a tight clamp. Finally, reinstall the driveshaft.

OEM 2001 Dodge Intrepid CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 CV Boots found

View related parts
2001 Dodge Intrepid Boot Kit Part Number: 4863722
Product Specifications
- Other Name: Boot - Half Shaft; CV Boot; Outer Boot; Boots; Boot Kit Half Shaft Outer
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.4 x 6.4 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4863722
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Dodge Intrepid Inner Boot Part Number: 4728261
Product Specifications
- Other Name: Boot - Halfshaft; CV Boot; Boot Kit Half Shaft Inner; Boot Package, Inner C.V.
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.5 x 6.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4728261
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2001 Dodge Intrepid CV Boot Parts and Q&A

Q: How to Replace the Outer CV Boot on 2001 Dodge Intrepid?
A: To replace the CV boot outer, remove the halfshaft assembly, discard clamps and slide off the boot. Clean the area and remove the snap ring and inspect for wear. A new boot and outer CV joint assembly with added grease and a tight clamp. Finally, reinstall the driveshaft.