How to Service and Repair Exhaust Valve and Intake Valves on 2001 Dodge Intrepid?

In order to fit the valve, take off cylinder head and the valve spring. Wipe the valve stem lock grooves, label all the valves and coat the stems with engine oil then re-fit. Check valve tip heights; intake not more than 47.59 mm and exhaust 49.14 mm. Grind where necessary then attach the valve spring.

OEM 2001 Dodge Intrepid Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Valves found

View related parts
2001 Dodge Intrepid Valves Part Number: 4663899
$20.27 MSRP: $41.30
You Save: $21.03 (51%)
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Intake Valve; Valve Intake Standard
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.1 x 2.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663899
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2001 Dodge Intrepid Intake Valve Part Number: 4663836
$26.34 MSRP: $38.35
You Save: $12.01 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valve Intake Standard
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.1 x 2.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663836
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2001 Dodge Intrepid Intake Valve Parts and Q&A

Q: How to Service and Repair Exhaust Valve and Intake Valves on 2001 Dodge Intrepid?
A: In order to fit the valve, take off cylinder head and the valve spring. Wipe the valve stem lock grooves, label all the valves and coat the stems with engine oil then re-fit. Check valve tip heights; intake not more than 47.59 mm and exhaust 49.14 mm. Grind where necessary then attach the valve spring.