How to Service and Repair an Oil Pressure Switch on 2001 Dodge Intrepid?

In order to carry out oil pressure sensor repair, jack up the car and put an oil container under it. Disconnect the electrical connector, unscrew the switch and apply some Mopar Thread Sealant to the new switch prior to installation. Reconnect the electrical connector and lower the vehicle, start the engine and check for leaks and oil levels.

OEM 2001 Dodge Intrepid Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2001 Dodge Intrepid Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 2.7L V6, 3.2L V6, 3.3L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2001 Dodge Intrepid Oil Pressure Switch Parts and Q&A

Q: How to Service and Repair an Oil Pressure Switch on 2001 Dodge Intrepid?
A: In order to carry out oil pressure sensor repair, jack up the car and put an oil container under it. Disconnect the electrical connector, unscrew the switch and apply some Mopar Thread Sealant to the new switch prior to installation. Reconnect the electrical connector and lower the vehicle, start the engine and check for leaks and oil levels.