How to Service and Repair an Oil Pressure Switch on 2002 Dodge Intrepid?

The oil pressure sensor can be repaired by lifting the vehicle and putting an oil container beneath the vehicle. Unplug the electrical connector, remove the screws of the switch and apply Mopar Thread Sealant to the new switch threads. Install a switch again, reconnect the connector, lower the vehicle, start the engine, and inspect the leaks and oil level.

OEM 2002 Dodge Intrepid Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2002 Dodge Intrepid Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 2.7L V6, 3.2L V6, 3.3L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2002 Dodge Intrepid Oil Pressure Switch Parts and Q&A

Q: How to Service and Repair an Oil Pressure Switch on 2002 Dodge Intrepid?
A: The oil pressure sensor can be repaired by lifting the vehicle and putting an oil container beneath the vehicle. Unplug the electrical connector, remove the screws of the switch and apply Mopar Thread Sealant to the new switch threads. Install a switch again, reconnect the connector, lower the vehicle, start the engine, and inspect the leaks and oil level.