JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Ram 2500 Ignition Coil
Ignition Coil Resistor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Ignition Coils found
2001 Dodge Ram 2500 Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00You Save: $40.35 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028172AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 2500 Ignition Coil Part Number: 56032521AC
$159.45 MSRP: $243.00You Save: $83.55 (35%)Product Specifications- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil
- Replaces: 56032521AB
- Item Weight: 2.50 Pounds
- Item Dimensions: 6.8 x 4.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56032521AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 2500 Ignition Coil Part Number: 56029098AB
$88.04 MSRP: $195.00You Save: $106.96 (55%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil
- Replaces: 56029098AA
- Item Weight: 3.30 Pounds
- Item Dimensions: 3.0 x 5.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 2500 Ignition Coil Parts and Q&A
- Q: How to Replace and Mount an Ignition Coil on 3.9/5.2/5.9L (LDC) Engines on 2001 Dodge Ram 2500?A: If the ignition coil needs to be replaced, it should always be replaced with an epoxy filled type as well. For 3.9/5.2/5.9L (LDC) engines, the coil is fitted to a bracket and bolted to the cylinder head in front of the right engine, above the automatic belt tensioner bracket using standard bolts. Start by taking off the primary wiring and the secondary spark plug cable from the ignition coil. Because of the tension put on by the accessory drive belt, the bracket-to-cylinder head mounting bolts should not be removed unless all belt tension is first released. When the coil has been disconnected, take it off the coil mount using the two bolts. During installation, affix the ignition coil to its mounting bracket and if you secure it with nuts or bolts, tighten them to 11 Nm (100 in. lbs.) If the hole was tapped just for the coil mounting bolts, tighten those to 5 Nm (50 in. lbs.) In the last step, attach all wires to the ignition coil again.
Related 2001 Dodge Ram 2500 Parts
2001 Dodge Ram 2500 MAP Sensor
2001 Dodge Ram 2500 Throttle Position Sensor
2001 Dodge Ram 2500 Camshaft Position Sensor
2001 Dodge Ram 2500 Coolant Temperature Sensor
2001 Dodge Ram 2500 Distributor
2001 Dodge Ram 2500 Distributor Cap
2001 Dodge Ram 2500 Distributor Rotor
2001 Dodge Ram 2500 Door Jamb Switch
2001 Dodge Ram 2500 Engine Control Module
2001 Dodge Ram 2500 Ignition Lock Assembly
2001 Dodge Ram 2500 Intake Manifold Temperature Sensor
2001 Dodge Ram 2500 Oxygen Sensor