How to Replace and Mount an Ignition Coil on Dodge Ram 2500?

The replacement for an ignition coil should be the same type of epoxy filled model. It is fitted to a bracket fastened to the front of the right engine cylinder head, resting on the automatic belt tensioner bracket and being held by normal bolts. You should first detach the primary wiring and the secondary spark plug cable before removing the ignition coil. Make sure you do not remove the coil mount to cylinder head bolts, as this bracket is held tight under the accessory drive belt tension; if you must remove the bolts, first let go of the belt tension. Two bolts are removed to take out the ignition coil from its coil mounting bracket. If you have nuts and bolts, attach the ignition coil to the coil bracket and tighten them to 11 Nm (100 in. lbs.). If the coil bracket has tapped holes, attach the coil and tighten the bolts to only 5 Nm (50 in. lbs.). Wires from every component go to the ignition coil in the end.

How to Service and Repair an Ignition Coil on a 5.7L Engine on Dodge Ram 2500?

Make sure to disconnect the electrical wire connector from the ignition coil before you begin the restoration. Clean the region near the coil using compressed air before you pull off the coil. After that, loosen the two bolts that join the coil to the bracket. Lift the coil gently from the valve cover and after that, take it out of the car.

OEM Dodge Ram 2500 Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Ignition Coils found

View related parts
Dodge Ram 2500 Ignition Coil Part Number: 56028394AD
$67.74 MSRP: $102.00
You Save: $34.26 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56028394AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 2500 | Laramie, SLT, ST | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00
You Save: $40.35 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Ram 2500 | Base | 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Ignition Coil Part Number: 4797293AB
$271.83 MSRP: $415.00
You Save: $143.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 4797293
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 5.2L V8, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
Dodge Ram 2500 Ignition Coil Part Number: 68238603AA
$104.52 MSRP: $144.00
You Save: $39.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Ignition Coil Part Number: 56032521AC
$159.45 MSRP: $243.00
You Save: $83.55 (35%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil
- Replaces: 56032521AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2004 Dodge Ram 2500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
Dodge Ram 2500 Ignition Coil Part Number: 56029098AB
$88.04 MSRP: $195.00
You Save: $106.96 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil
- Replaces: 56029098AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2004 Dodge Ram 2500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
Dodge Ram 2500 Ignition Coil Part Number: 53006566
Product Specifications
- Other Name: Coil/Ignition Ignition; Coil, 4-6-8 Cylinder (Optional W/5234610)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 2500 | Base
View related parts
Dodge Ram 2500 Ignition Coil Part Number: 53006565
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil, 4-6-8 Cylinder (Optional W/5234610)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 2500 | Base

Dodge Ram 2500 Ignition Coil

Choose OEM Ignition Coil that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ignition Coil follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Ignition Coil as installed in Dodge Ram 2500 vehicles is Competition for converting the low voltage from the battery into the high voltage required to fire the air/fuel mixture in the cylinder. This is the link between the primary and secondary circuits where; the primary circuit embraces the battery, the ignition switch and the triggering device while the second circuit comprises the high tension lead and distributor cap. Dodge Ram 2500 Ignition Coils are made up of an insulated copper primary and secondary coil wrapped round an iron core, around which is a housing of plastic, epoxy, or polymer. The various ignition systems that has been used on Ram 2500 models in the past include the breaker point, the electronic distributor, the coil-on-plug and the wasted spark; all delivering voltage in different ways to the spark plugs in the vehicles. An Ignition Coil that is not functioning right can cause your engine to misfire, poor fuel efficiency and loss of power; therefore is important to check on it for a smooth running of the vehicle.

Dodge Ram 2500 Ignition Coil Parts and Q&A

Ignition Coil
56028172AC
Q: How to Replace and Mount an Ignition Coil on Dodge Ram 2500?
A:
The replacement for an ignition coil should be the same type of epoxy filled model. It is fitted to a bracket fastened to the front of the right engine cylinder head, resting on the automatic belt tensioner bracket and being held by normal bolts. You should first detach the primary wiring and the secondary spark plug cable before removing the ignition coil. Make sure you do not remove the coil mount to cylinder head bolts, as this bracket is held tight under the accessory Drive Belt tension; if you must remove the bolts, first let go of the belt tension. Two bolts are removed to take out the ignition coil from its coil mounting bracket. If you have nuts and bolts, attach the ignition coil to the coil bracket and tighten them to 11 Nm (100 in. lbs.). If the coil bracket has tapped holes, attach the coil and tighten the bolts to only 5 Nm (50 in. lbs.). Wires from every component go to the ignition coil in the end.
Ignition Coil
68238603AA
Q: How to Service and Repair an Ignition Coil on a 5.7L Engine on Dodge Ram 2500?
A:
Make sure to disconnect the electrical wire connector from the ignition coil before you begin the restoration. Clean the region near the coil using compressed air before you pull off the coil. After that, loosen the two bolts that join the coil to the bracket. Lift the coil gently from the valve cover and after that, take it out of the car.