Where is the Intake Manifold Temperature Sensor located and how is it removed and installed on 2001 Dodge Ram 2500 Van?

Intake Temperature (IMT) sensor is on the front /side of the intake manifold, this sensor can be taken off without having to remove engine cover. To do away with it, disconnect the negative battery cable, electrical connector and then sensor. Installation To install, reattach the sensor, tighten to 28 Nm, reconnect electrical connector, and battery cable.

OEM 2001 Dodge Ram 2500 Van Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2001 Dodge Ram 2500 Van Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Ram 2500 Van Intake Manifold Temperature Sensor Parts and Q&A

Q: Where is the Intake Manifold Temperature Sensor located and how is it removed and installed on 2001 Dodge Ram 2500 Van?
A: Intake Temperature (IMT) sensor is on the front /side of the intake manifold, this sensor can be taken off without having to remove engine cover. To do away with it, disconnect the negative battery cable, electrical connector and then sensor. Installation To install, reattach the sensor, tighten to 28 Nm, reconnect electrical connector, and battery cable.