How to Properly Service and Install an Oil Filter on 2002 Chrysler Concorde?

Just take out the oil filter with the proper oil filter wrench, then manage it properly following the rules for disposing of waste products. After that, wipe the filter base free of oil and examine the surface of the gasket. Coat the rubber part of the new filter with clean oil before adding it, then tighten it by hand until the wrench reads 16 Nm (12 ft. lbs.) after contact with the engine base. When the crankcase has been drained, ensure the correct level and type of engine oil is inside, turn the key and look for leaks.

OEM 2002 Chrysler Concorde Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2002 Chrysler Concorde Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Concorde Submodels:
- Base, LX, LXi, Limited | 2.7L V6, 3.2L V6, 3.3L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2002 Chrysler Concorde Oil Filter Parts and Q&A

Q: How to Properly Service and Install an Oil Filter on 2002 Chrysler Concorde?
A: Just take out the oil filter with the proper oil filter wrench, then manage it properly following the rules for disposing of waste products. After that, wipe the filter base free of oil and examine the surface of the gasket. Coat the rubber part of the new filter with clean oil before adding it, then tighten it by hand until the wrench reads 16 Nm (12 ft. lbs.) after contact with the engine base. When the crankcase has been drained, ensure the correct level and type of engine oil is inside, turn the key and look for leaks.