OEM 2002 Chrysler Concorde Washer Reservoir

2002 Chrysler Concorde Washer Reservoir Parts and Q&A

• Q: How to Replace a Washer Reservoir on 2002 Chrysler Concorde?

  A: Before you begin, open the hood and pull out the negative battery cable from its remote battery post. Vehicles held up require you to support them this way. Separate the wire connectors from the reservoir pump and float sensor and detach the washer hose to make sure the liquid doesn't come out. Pull the filler tube off the back of the washer reservoir by reaching area near the machine's base. Loosen and pull out the four bolts holding the washer reservoir in the vehicle. Put the sensor, pump and washer fluid into the new reservoir. Before installing the reservoir, put it in place and attach the four bolts that hold it. Click the filler tube into place at the back of the reservoir, join the washer hose to the pump's outlet and hook the wire connectors to the pump and sensor in the reservoir. Attach the front fascia to the left side, support the vehicle using wood when needed, lower the vehicle and place the negative battery cable back on the post on the remote battery.