Other Name: Line - A/C Discharge; Line A/C Discharge
Item Weight: 1.60 Pounds
Item Dimensions: 15.8 x 14.5 x 5.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4786474
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
Base | 6 Cyl 3.5 L GAS
2002 Chrysler Prowler A/C Hose Parts and Q&A
Q: How to Replace an A/C Hose in an HVAC System on 2002 Chrysler Prowler?
A: Start by emptying the refrigerant from the A/C system with your recovery device, then cut the wire connecting the transducer to the system. Then, remove the quick connect clip and take off the quick connect at the condenser with Special Tool kit 7193, making sure to cap all lines you don't replace and the expansion valve tubes. Drop the line at the air conditioner compressor and take out the discharge line. Before tightening, put the discharge line into the vehicle and join it with the A/C compressor, turning the fastening bolt to 22 Nm (200 in. lbs.). Attach the line at the condenser to the A/C transducer wire connector and evacuate and recharge the system.