How to Service the Blend Door Actuator on 2002 Chrysler Prowler?

To service the Air Door Actuator/Motor, it is necessary to have an adequate battery voltage. Remove the M1 fuse for 60 seconds to self calibrate. If one does not calibrate, replace the actuator on the upper left of the A/C-Heater housing. Follow the removal and installation procedures carefully with proper shaft positioning.

OEM 2002 Chrysler Prowler Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2002 Chrysler Prowler Actuator Part Number: 4815502AB
Product Specifications
- Other Name: Actuator - Mode Control; Actuator Mode Control
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.7 x 4.1 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4815502AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 6 Cyl 3.5 L GAS

2002 Chrysler Prowler Blend Door Actuator Parts and Q&A

Q: How to Service the Blend Door Actuator on 2002 Chrysler Prowler?
A: To service the Air Door Actuator/Motor, it is necessary to have an adequate battery voltage. Remove the M1 fuse for 60 seconds to self calibrate. If one does not calibrate, replace the actuator on the upper left of the A/C-Heater housing. Follow the removal and installation procedures carefully with proper shaft positioning.