OEM 2002 Chrysler Prowler Door Handle

2002 Chrysler Prowler Door Handle Parts and Q&A

• Q: How to Maintain and Fix a Door Handle on 2002 Chrysler Prowler?

  A: Removing the door handle bezel and door trim panel is the first step to servicing the inside door release handle. Remove the link clips from the latch and lock and remove the screw that holds the door release handle to the inside door panel. Remove the screws from the release handle mounting and release the wires from the anti-rattle clips that hold them to the inner door panel. Open the door, pull both the release handle and rods away from the door panel and then get the release handle out of the vehicle. When installing, position the handle onto the door, then slide the rear edge of the bracket away from the panel so the handle fits into the grooves on the bracket. Afterward, hook the link rods onto the handle and insert them all into the door. Connect the latch release link and lock link to the door by attaching the clips in their place. Put the screws in place that attach the release handle to the inside panel of the door and close them with a screwdriver. Join the rods to the anti-rattle clips on the inner panel, fit in the door trim panel and the inner door handle bezel as well.