OEM 2002 Chrysler Prowler Exhaust Valve

2002 Chrysler Prowler Exhaust Valve Parts and Q&A

• Q: How to Service and Repair Exhaust Valve and Intake Valves on 2002 Chrysler Prowler?

  A: Remove the valve spring as the very first step to service or repair the valve. Before the valve is removed, tidy up any burs in the valve stem lock grooves and be sure to put back each valve in the same spot. After that, take off the valves from the cylinder head. Before the install, apply clean engine oil to the valve stems and put each into its proper hole in the cylinder head. When the valves or seats have been reground, measure the height of the valve tip which must not go over 43.65 mm for intake or 45.98 mm for exhaust. If so, grind them until the height matches these values, always measuring from the cylinder head to the very top of the valve stem. Lastly, put in the valve stem seals and valve springs.