How to Remove and Install the Idle Control Valve on the Throttle Body on 2002 Chrysler Prowler?

In order to eliminate the idle air control motor in the throttle body, disconnect electrical connector, unlock screws, and pull out the motor with O-ring. Install the new motor with O-ring, making sure that the pintle is retracted when above 1 inch and then clamp it on and re-connect electrical connector.

OEM 2002 Chrysler Prowler Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Idle Control Valve found

View related parts
2002 Chrysler Prowler Idle Speed Control Part Number: 4861035AE
Product Specifications
- Other Name: Motor - A.I.S.; Fuel Injection Idle Air Control Valve; Idle Air Control Valve; Idle Control Motor
- Replaces: 4861035AD, 4861035AC, 4861035AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861035AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2002 Chrysler Prowler Idle Control Valve Parts and Q&A

Q: How to Remove and Install the Idle Control Valve on the Throttle Body on 2002 Chrysler Prowler?
A: In order to eliminate the idle air control motor in the throttle body, disconnect electrical connector, unlock screws, and pull out the motor with O-ring. Install the new motor with O-ring, making sure that the pintle is retracted when above 1 inch and then clamp it on and re-connect electrical connector.