Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM Chrysler Prowler Idle Control Valve

IACV
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Idle Control Valve found

  • Chrysler Prowler Idle Control Valve - 4861035AE
    Chrysler Prowler Idle Control Valve Diagram - 4861035AE
    View related parts

    Chrysler Prowler Idle Speed Control Part Number: 4861035AE

    Product Specifications
    • Other Name: Motor - A.I.S.; Fuel Injection Idle Air Control Valve; Idle Air Control Valve; Idle Control Motor
    • Replaces: 4861035AD, 4861035AC, 4861035AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2001-2002 Chrysler Prowler | Base | 3.5L V6, 6 Cyl 3.5 L GAS

Chrysler Prowler Idle Control Valve

Choose OEM Idle Control Valve that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Idle Control Valve follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Prowler Idle Control Valve Parts and Q&A

  • Chrysler Prowler Idle Control Valve - 4861035AE Idle Speed Control Idle Speed Control
    4861035AE
    Q: How to Remove and Install the Idle Control Valve on the Throttle Body on Chrysler Prowler?
    A:
    The idle air control motor is mounted on the far end of the intake manifold plenum, attached to the Throttle Body. First, remove the electrical connection from the idle air control motor, next taking out the screws that hold the motor in place and making sure the O-ring is removed as you remove the motor from the throttle body. A new O-ring is provided with the installation of the new idle air control motor. For a pintle longer than 1 inch (25 mm), use the DRB IAC Motor Open/Close Test with the battery attached to move the pintle. Place the motor into the housing, fasten the mounting screws and tighten them to 3 Nm (25 in. lbs.). After that, reconnect the electrical connector to the motor.

Related Chrysler Prowler Parts

Browse Chrysler Prowler Idle Control Valve by Years

+
2002 2001