How to Properly Service and Repair an Oil Filter on 2002 Chrysler Prowler?

The first step in oil filter maintenance is to lift the car on a hoist. With the proper wrench for the filter, take off the filter from the base and throw it away. After that, wash the base again and make sure the gasket surface is clean. Use clean engine oil to lubricate the gasket on the filter and tighten it afterward to 20 Nm (15 ft. lbs.) torque once it touches the base. After that, put the vehicle on level ground, check the crankcase oil level, start the engine and look for any leaks.

OEM 2002 Chrysler Prowler Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2002 Chrysler Prowler Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2002 Chrysler Prowler Oil Filter Parts and Q&A

Q: How to Properly Service and Repair an Oil Filter on 2002 Chrysler Prowler?
A: The first step in oil filter maintenance is to lift the car on a hoist. With the proper wrench for the filter, take off the filter from the base and throw it away. After that, wash the base again and make sure the gasket surface is clean. Use clean engine oil to lubricate the gasket on the filter and tighten it afterward to 20 Nm (15 ft. lbs.) torque once it touches the base. After that, put the vehicle on level ground, check the crankcase oil level, start the engine and look for any leaks.