How to Maintain and Fix a Mirror Switch on 2002 Chrysler Sebring?

To fix the power mirror switch, remove the battery negative connection cable. Pry off the trim bezel, disconnect the wire harness of the switch and remove the switch. For installation, reverse the process, put the switch in the bezel, reconnect the harness, reinstall the bezel and reconnect the battery.

OEM 2002 Chrysler Sebring Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mirror Switches found

View related parts
2002 Chrysler Sebring Mirror Switch, Front Part Number: 4608505AB
$52.53 MSRP: $77.45
You Save: $24.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Mirror; Door Mirror Switch, Front; Power Mirror Switch; Switch Mirror
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4608505AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Mirror Switch Part Number: MB603049
Product Specifications
- Other Name: Switch - Remote Mirror Control; Door Mirror Switch; Switch Remote Mirror Control
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MB603049
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler Sebring Submodels:
- Base, LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2002 Chrysler Sebring Mirror Switch Parts and Q&A

Q: How to Maintain and Fix a Mirror Switch on 2002 Chrysler Sebring?
A: To fix the power mirror switch, remove the battery negative connection cable. Pry off the trim bezel, disconnect the wire harness of the switch and remove the switch. For installation, reverse the process, put the switch in the bezel, reconnect the harness, reinstall the bezel and reconnect the battery.