JeepParts
My Garage
My Account
Cart
OEM 2002 Chrysler Voyager Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Shift Cables found
2002 Chrysler Voyager Shift Control Cable Part Number: 4670122AG
Product Specifications- Other Name: Cable - Gearshift Control; Automatic Transmission Shifter Cable; Cable Gearshift Control
- Replaces: 4670122AF
- Item Weight: 2.60 Pounds
- Item Dimensions: 24.5 x 18.7 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4670122AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Chrysler Voyager Shift Control Cable Part Number: 4641755AC
Product Specifications- Other Name: Cable - Gearshift Control; Automatic Transmission Shifter Cable
- Item Weight: 2.30 Pounds
- Item Dimensions: 24.5 x 14.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4641755AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Chrysler Voyager Shift Cable Parts and Q&A
- Q: How to Service and Repair the Shift Cable for a 31TH Automatic Transmission on 2002 Chrysler Voyager?A: Before servicing or repairing the shift cable on a 31Th automatic transmission, remove the negative battery cable. After that, pull the gear shift cable out of the manual valve lever and away from the upper mount bracket. Take off the lower silencer on the instrument panel and the knee bolster and cut the Prndl cable from the gear shift lever and the gear shift cable from the gear shift lever. Take the gear shift cable out of the column bracket, unplug the grommet from the dash panel and take the cable out of the vehicle. Insert the gear shift cable up through the dash panel and make sure the grommet stays in place. Pass the gear shift cable through the column bracket until you hear a click and then join it to the gear shift lever and Prndl cable, making sure it fits properly. Connect the knee bolster and the instrument panel lower silencer, then link the gear shift cable to the transaxle upper mount bracket, listen for another click and connect the end of the cable to the transaxle manual valve lever.
