How to Service and Repair a MAP Sensor on 2002 Dodge Caravan?

In order to maintain the MAP Sensor, remove the negative battery cable, then the electrical connector and vacuum hose. Unscrew two screws attaching the sensor to the product, then screw the new sensor back and tighten the screws. Reconnect electrical connector, vacuum hose and lastly the negative battery cable.

OEM 2002 Dodge Caravan MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2002 Dodge Caravan M.A.P. Sensor Part Number: 68002763AA
$112.00 MSRP: $167.00
You Save: $55.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.0 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002763AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Caravan Submodels:
- C/V, SE, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2002 Dodge Caravan M.A.P. Sensor Part Number: 4686684AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Replaces: 4686684AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.0 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686684AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Caravan Submodels:
- Base, Ec, SE | 2.4L L4, 4 Cyl 2.4 L GAS

2002 Dodge Caravan MAP Sensor Parts and Q&A

Q: How to Service and Repair a MAP Sensor on 2002 Dodge Caravan?
A: In order to maintain the MAP Sensor, remove the negative battery cable, then the electrical connector and vacuum hose. Unscrew two screws attaching the sensor to the product, then screw the new sensor back and tighten the screws. Reconnect electrical connector, vacuum hose and lastly the negative battery cable.