How to Maintain a MAP Sensor for Optimal Performance on 2001 Dodge Caravan?

The electrical connector and the vacuum hose should be disconnected and the negative battery cable should be disconnected to service the MAP Sensor. Unscrew the two screws that hold the sensor, replace the sensor and screw the screws. Connect the electrical connector, the vacuum hose again and lastly, the negative battery cable.

OEM 2001 Dodge Caravan MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2001 Dodge Caravan M.A.P. Sensor Part Number: 68002763AA
$112.00 MSRP: $167.00
You Save: $55.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.0 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002763AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Caravan Submodels:
- C/V, SE, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2001 Dodge Caravan M.A.P. Sensor Part Number: 4686684AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Replaces: 4686684AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.0 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686684AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Caravan Submodels:
- Base, Ec, SE | 2.4L L4, 4 Cyl 2.4 L GAS

2001 Dodge Caravan MAP Sensor Parts and Q&A

Q: How to Maintain a MAP Sensor for Optimal Performance on 2001 Dodge Caravan?
A: The electrical connector and the vacuum hose should be disconnected and the negative battery cable should be disconnected to service the MAP Sensor. Unscrew the two screws that hold the sensor, replace the sensor and screw the screws. Connect the electrical connector, the vacuum hose again and lastly, the negative battery cable.