How to Remove and Install an Ignition Lock Cylinder on 2002 Dodge Ram 1500?

Before removing the ignition lock cylinder, make sure the ignition key is where it should be, disconnect the negative battery cable and remove the upper and lower covers of the steering column. Put the shifter into PARK mode, find the retaining pin next to the key cylinder, line the key with the RUN position, press on the retaining pin and carefully remove the key cylinder from the ignition lock. During installation, insert the key into the key cylinder, place the cylinder in line with the ignition lock, push until it clicks, fit the shrouds on and reattach the battery.

OEM 2002 Dodge Ram 1500 Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2002 Dodge Ram 1500 Ignition Lock Cylinder Part Number: 5018702AA
$209.61 MSRP: $310.00
You Save: $100.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock - Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder Ignition Lock
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.7 x 1.3 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5018702AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2002 Dodge Ram 1500 Ignition Lock Cylinder Parts and Q&A

Q: How to Remove and Install an Ignition Lock Cylinder on 2002 Dodge Ram 1500?
A: Before removing the ignition lock cylinder, make sure the ignition key is where it should be, disconnect the negative battery cable and remove the upper and lower covers of the steering column. Put the shifter into PARK mode, find the retaining pin next to the key cylinder, line the key with the RUN position, press on the retaining pin and carefully remove the key cylinder from the ignition lock. During installation, insert the key into the key cylinder, place the cylinder in line with the ignition lock, push until it clicks, fit the shrouds on and reattach the battery.