Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Dodge Ram 2500 Release Bearing

Clutch Release Throw Out Bearing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Release Bearings found

  • 2002 Dodge Ram 2500 Release Bearing - 53008342
    2002 Dodge Ram 2500 Release Bearing - 53008342
    2002 Dodge Ram 2500 Release Bearing - 53008342
    2002 Dodge Ram 2500 Release Bearing - 53008342
    2002 Dodge Ram 2500 Release Bearing Diagram - 53008342
    View related parts

    2002 Dodge Ram 2500 Release Bearing Part Number: 53008342

    $153.85 MSRP: $231.00
    You Save: $77.15 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing Assembly, With Sleeve, Clutch Release 1990-91; For 3.9 L, 5.2 L, 5.9 L Engines.
    • Replaces: 53008342AB
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 3.2 x 4.9 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53008342
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Dodge Ram 2500 Submodels:
    • Base, Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
  • 2002 Dodge Ram 2500 Release Bearing - 52087514
    2002 Dodge Ram 2500 Release Bearing - 52087514
    2002 Dodge Ram 2500 Release Bearing - 52087514
    2002 Dodge Ram 2500 Release Bearing - 52087514
    2002 Dodge Ram 2500 Release Bearing - 52087514
    2002 Dodge Ram 2500 Release Bearing Diagram - 52087514
    View related parts

    2002 Dodge Ram 2500 Release Bearing Part Number: 52087514

    $192.53 MSRP: $257.00
    You Save: $64.47 (26%)
    ADD TO CART
    Product Specifications
    • Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing, Clutch Release W/3.9 L, 5.2 L, 5.9 L Engine; Bearing Clutch Release
    • Item Weight: 1.90 Pounds
    • Item Dimensions: 3.2 x 4.8 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52087514
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Dodge Ram 2500 Submodels:
    • Base, Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2002 Dodge Ram 2500 Release Bearing Parts and Q&A

  • Q: How to Service and Repair a Release Bearing on 2002 Dodge Ram 2500?
    A: The first step is to remove the transmission and transfer case if you have them and then remove the clutch housing for vehicles with NV4500. Take off the bearing holder from the release fork and unscrew the bearing from its seat. Check the bearing slide surface on the front retainer of the transmission and change the retainer if it is scored, worn or cracked. Check the stud on the bottom of the leg to make sure it is secure and not malfunctioning and check the fork to ensure it is not bent or damaged. If the fork spring clips look damaged or are bent, replace them. Apply Mopar high temperature bearing grease or an equivalent to the input shaft splines, bearing retainer slide surface, lever pivot ball stud and release lever pivot surface. Set up the release fork and release bearing, securing them with spring clips and put the release fork in place so that the raised portion on its rear faces the slave cylinder location on the transmission. If the clutch housing came out, install it first before putting the transmission and transfer case in place.

Related 2002 Dodge Ram 2500 Parts

Alternate Year Models

+
2001 Dodge Ram 2500 Release Bearing 2003 Dodge Ram 2500 Release Bearing