Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Dodge Ram 2500 Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

  • 2002 Dodge Ram 2500 Steering Knuckle - 5015238AA
    2002 Dodge Ram 2500 Steering Knuckle Diagram - 5015238AA
    View related parts

    2002 Dodge Ram 2500 Knuckle, Front Passenger Side Part Number: 5015238AA

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
    • Position: Front Passenger Side
    • Item Weight: 19.10 Pounds
    • Item Dimensions: 14.3 x 14.5 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5015238AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Dodge Ram 2500 Submodels:
    • Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
  • 2002 Dodge Ram 2500 Steering Knuckle - 5015239AA
    2002 Dodge Ram 2500 Steering Knuckle Diagram - 5015239AA
    View related parts

    2002 Dodge Ram 2500 Knuckle, Front Driver Side Part Number: 5015239AA

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
    • Position: Front Driver Side
    • Item Weight: 2.20 Pounds
    • Item Dimensions: 14.6 x 14.3 x 7.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5015239AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Dodge Ram 2500 Submodels:
    • Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2002 Dodge Ram 2500 Steering Knuckle Parts and Q&A

  • Q: How to Service and Repair a Steering Knuckle on 2002 Dodge Ram 2500?
    A: To begin working on the steering knuckle, support and lift the vehicle, remove the wheel and tire and turn on your emergency brake. Following that, separate the brake caliper and rotor by removing them. With the help of puller C-3894-A, disconnect the end of the tie rod from the knuckle. After that, with mobile removers MD-990635 and C-4150A, separate both ball joints from the knuckle. When installing, put the knuckle on the ball joints and fit the ball joint nuts, tightening the upper ball joint nut to 81 Nm (60 ft. lbs.) and add the cotter pin. Torque down the lower ball joint nut to 149 Nm (110 ft. lbs.) and then add the cotter pin. Reconnect the tie rod end to the steering knuckle, gain torque of 108 Nm or 80 ft. lbs. and insert the cotter pin. After that, place the wheel and tire assembly back in position, attach the caliper and brake rotor and lower the vehicle by removing the support.

Related 2002 Dodge Ram 2500 Parts

Alternate Year Models

+
2001 Dodge Ram 2500 Steering Knuckle 2003 Dodge Ram 2500 Steering Knuckle