Other Name: Seat Belt - Rear Inner; Seat Belt Receptacle, Rear; Latch; Seat Belt Rear Inner Two Buckles
Position: Rear Inner
Item Weight: 1.30 Pounds
Item Dimensions: 19.3 x 3.2 x 1.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: SP431L5AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2002 Dodge Stratus Submodels:
ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
| Page 1 of 2 |Next >
1-20 of 39 Results
2002 Dodge Stratus Seat Belt Parts and Q&A
Q: How to Maintain the Rear Outboard Seat Belt on 2002 Dodge Stratus?
A: Initially, you need to remove the back seat cushion and afterwards take apart the bolt that connects the anchor of the seat belt to the floor pan. Then, take out the trim panel from both the upper and lower quarter area. Then remove the bolt attaching the rear D-ring to the upper quarter and the bolt securing the rear seat belt retractor to the inner quarter panel. When these are done, withdraw the retractor and belt out of your vehicle. Install the retractor and belt, then secure the bolt from the rear seat belt retractor to the inner quarter panel, so that it reaches 40 Nm (29.5 ft. lbs.) of torque. Ship the belt run, fit the D-ring via the upper trim panel, connect the D-ring over the quarter panel with the provided bolt and tighten it to 40 Nm (29.5 ft. lbs.). Hook the rear seat in its place and fit the upper quarter trim again. Then place the seat belt anchor in its place in the floor pan and fix it there with the bolt, ensuring a tight 40 Nm (29.5 ft. lbs.) torque.