How to Service and Repair a Vapor Canister on 2002 Dodge Stratus?

Before doing anything else, take out the negative cable from the battery. After that, get rid of the fuel tank and remove the LDP Pump from inside the EVAP canister. Unhook the hoses from the EVAP canister, unplug the plastic connector from the bracket surrounding the canister and remove the canister from the bracket. Install the LDP to the EVAP Canister first, place the EVAP Canister in the bracket and finally use the plastic fastener to fix it. Fasten the hoses together, put the fuel tank back in and then attach the negative battery cable.

OEM 2002 Dodge Stratus Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vapor Canisters found

View related parts
2002 Dodge Stratus Vapor Canister Part Number: MR281041
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR281041
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Stratus Submodels:
- R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Dodge Stratus Vapor Canister Part Number: 4764060
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Item Weight: 3.80 Pounds
- Item Dimensions: 15.8 x 10.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764060
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Stratus Submodels:
- Base, ES, R/T, SE, SE Plus | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2002 Dodge Stratus Vapor Canister Parts and Q&A

Q: How to Service and Repair a Vapor Canister on 2002 Dodge Stratus?
A: Before doing anything else, take out the negative cable from the battery. After that, get rid of the fuel tank and remove the LDP Pump from inside the EVAP canister. Unhook the hoses from the EVAP canister, unplug the plastic connector from the bracket surrounding the canister and remove the canister from the bracket. Install the LDP to the EVAP Canister first, place the EVAP Canister in the bracket and finally use the plastic fastener to fix it. Fasten the hoses together, put the fuel tank back in and then attach the negative battery cable.