How to Maintain a Tail Light on 2002 Jeep Grand Cherokee?

To service the tail lamp, remove assembly and make the bulb socket and wire harness disconnect. Install the new bulb, fix the socket and reconnect the harness. Position the lamp so that it is in line with the retainer, press the lamp into place, then put the screws back in to secure the lamp in place on the vehicle.

OEM 2002 Jeep Grand Cherokee Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tail Lights found

View related parts
2002 Jeep Grand Cherokee Tail Lamp Assembly, Driver Side Part Number: 5101897AB
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Left; Tail Light
- Position: Driver Side
- Replaces: 5101897AA
- Item Weight: 6.40 Pounds
- Item Dimensions: 13.2 x 12.5 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101897AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Jeep Grand Cherokee Tail Lamp Assembly, Passenger Side Part Number: 5101896AB
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Right; Tail Light
- Position: Passenger Side
- Replaces: 5101896AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 12.8 x 12.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101896AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2002 Jeep Grand Cherokee Tail Light Parts and Q&A

Q: How to Maintain a Tail Light on 2002 Jeep Grand Cherokee?
A: To service the tail lamp, remove assembly and make the bulb socket and wire harness disconnect. Install the new bulb, fix the socket and reconnect the harness. Position the lamp so that it is in line with the retainer, press the lamp into place, then put the screws back in to secure the lamp in place on the vehicle.