How to Locate, Remove, and Install a Canister Purge Valve on 2002 Jeep Liberty?

The duty cycle EVAP canister purge valve is placed in the engine compartment, joined to a bracket between the battery and PDC, so that the EVAP system test port is nearby. You should first remove the connector and harness at the valve and then carefully pull the valve and its bracket up. Getting the system installed, place the EVAP canister purge valve on its bracket, connect the valve to its harness and finally attach the electrical connector to the valve.

OEM 2002 Jeep Liberty Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2002 Jeep Liberty Purge Valve Part Number: 52128550AA
$96.47 MSRP: $147.00
You Save: $50.53 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid - Duty Cycle Purge; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Solenoid; Solenoid; Solenoid Duty Cycle Purge; Canister Purge Solenoid
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.8 x 3.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128550AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2002 Jeep Liberty Canister Purge Valve Parts and Q&A

Q: How to Locate, Remove, and Install a Canister Purge Valve on 2002 Jeep Liberty?
A: The duty cycle EVAP canister purge valve is placed in the engine compartment, joined to a bracket between the battery and PDC, so that the EVAP system test port is nearby. You should first remove the connector and harness at the valve and then carefully pull the valve and its bracket up. Getting the system installed, place the EVAP canister purge valve on its bracket, connect the valve to its harness and finally attach the electrical connector to the valve.