How to Replace a Headlight Bulb on 2002 Jeep Wrangler?

You need to unhook and isolate the battery's negative cable to work on the headlamp bulb. After that, detach the screws that secure the headlamp cover and then take away the screws holding the Skittle ring. Take off the cover over the headlamp wiring. Move it out of the way and cut the headlamp wiring. For installation, link the plug and bullet and place the bulb into the bucket. Following that, attach the retaining ring to the back of the headlamp bulb and screw in both screws. After that, attach the metal ring around the headlamp, making sure the screws are secure and plug back in the negative baterry terminal.

OEM 2002 Jeep Wrangler Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Headlight Bulb found

View related parts
2002 Jeep Wrangler Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L002825W5W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Rubicon, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler Headlight Bulb Parts and Q&A

Q: How to Replace a Headlight Bulb on 2002 Jeep Wrangler?
A: You need to unhook and isolate the battery's negative cable to work on the headlamp bulb. After that, detach the screws that secure the headlamp cover and then take away the screws holding the Skittle ring. Take off the cover over the headlamp wiring. Move it out of the way and cut the headlamp wiring. For installation, link the plug and bullet and place the bulb into the bucket. Following that, attach the retaining ring to the back of the headlamp bulb and screw in both screws. After that, attach the metal ring around the headlamp, making sure the screws are secure and plug back in the negative baterry terminal.