How to Replace a Headlight Bulb on 2003 Jeep Wrangler?

To service the headlamp bulb, battery negative cable to be disconnected, bezel and retaining ring screws to be removed and wire harness to be disconnected. Remove the bulb, and replace with the new one, by connecting the harness, tightening the retaining ring, and bezel. Finally, re-connect the negative cable of the battery.

OEM 2003 Jeep Wrangler Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Headlight Bulb found

View related parts
2003 Jeep Wrangler Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L002825W5W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Rubicon, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2003 Jeep Wrangler Headlight Bulb Parts and Q&A

Q: How to Replace a Headlight Bulb on 2003 Jeep Wrangler?
A: To service the headlamp bulb, battery negative cable to be disconnected, bezel and retaining ring screws to be removed and wire harness to be disconnected. Remove the bulb, and replace with the new one, by connecting the harness, tightening the retaining ring, and bezel. Finally, re-connect the negative cable of the battery.