How to Service an Air Bag Control Module for Side Impact on 2003 Chrysler Concorde?

For servicing the Side Impact air bag Control Module disconnect the battery Negative cable and wait for 2 minutes. Remove the lower B-pillar trim, disconnect the module, and remove it. For installation, fix the module, connect the electrical connector, and reinstall the trim. Do not re-connect the battery before testing.

OEM 2003 Chrysler Concorde Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2003 Chrysler Concorde SDM Module Part Number: 4602406AB
$173.87 MSRP: $285.00
You Save: $111.13 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Diagnostic Unit
- Replaces: 4602406AA
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4602406AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Concorde Submodels:
- LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Chrysler Concorde Control Module Part Number: 4602274AG
Product Specifications
- Other Name: Module - Air Bag Control; Side Sensor; Module; Module Air Bag Control
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 3.5 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4602274AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Concorde Submodels:
- LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2003 Chrysler Concorde Air Bag Control Module Parts and Q&A

Q: How to Service an Air Bag Control Module for Side Impact on 2003 Chrysler Concorde?
A: For servicing the Side Impact air bag Control Module disconnect the battery Negative cable and wait for 2 minutes. Remove the lower B-pillar trim, disconnect the module, and remove it. For installation, fix the module, connect the electrical connector, and reinstall the trim. Do not re-connect the battery before testing.