How to Replace a CV Boot on 2003 Chrysler Concorde?

In order to make a replacement of the outer CV boot, take away the halfshaft assembly and dispose the old clamps. Wash the component, checking wear. Install a new seal boot and outer CV joint assembly, making sure that the snap tie fits. Lubricate the assembly, load up the boots and re-fit the driveshaft.

OEM 2003 Chrysler Concorde CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 CV Boots found

View related parts
2003 Chrysler Concorde Boot Kit Part Number: 4863722
Product Specifications
- Other Name: Boot - Half Shaft; CV Boot; Outer Boot; Boots; Boot Kit Half Shaft Outer
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.4 x 6.4 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4863722
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Concorde Submodels:
- Base, LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Chrysler Concorde Inner Boot Part Number: 4728261
Product Specifications
- Other Name: Boot - Halfshaft; CV Boot; Boot Kit Half Shaft Inner; Boot Package, Inner C.V.
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.5 x 6.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4728261
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Concorde Submodels:
- Base, LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2003 Chrysler Concorde CV Boot Parts and Q&A

Q: How to Replace a CV Boot on 2003 Chrysler Concorde?
A: In order to make a replacement of the outer CV boot, take away the halfshaft assembly and dispose the old clamps. Wash the component, checking wear. Install a new seal boot and outer CV joint assembly, making sure that the snap tie fits. Lubricate the assembly, load up the boots and re-fit the driveshaft.