How to Replace a Headlight Bulb on 2003 Chrysler Sebring?

Remove the battery negative cable from the headlamp before you replace the bulb in the export model. After loosening the retaining screws on the headlamp unit, remove it to see the back. Take out the connection clips from the power supply and pull back on the protective rubber seal of the headlamp. Pop the headlamp bulb retaining clip out of its socket, followed by pulling the headlamp bulb from the unit. For installation, put the new bulb into the headlamp mount and hold it in place with the retaining clip. Place the rubber boot on, link the wire connector back to the headlamp and mount the headlamp. Lastly, attach the headlamp seals to the retaining screws and link the negative battery cable.

OEM 2003 Chrysler Sebring Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Headlight Bulbs found

View related parts
2003 Chrysler Sebring Headlamp Bulb, Front Part Number: L0009007QL
$24.35 MSRP: $35.75
You Save: $11.40 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Roof Lamp Bulb; Bulb; Bulb Headlamp
- Position: Front
- Replaces: MS820973, 154882AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009007QL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 2.4L L4, 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Bulb & Socket, Front Part Number: L0009006
$26.50 MSRP: $38.95
You Save: $12.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Fog Light Bulb; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; Headlamp Bulb; High Beam, Roof, Fog, Lower Beam, Composite Bulbs; Bulb 9006; Headlight.
- Position: Front
- Replaces: 5096939AA, MS820960
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 2.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009006
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Chrysler Sebring Socket, Front Part Number: MN142069
$5.12 MSRP: $6.48
You Save: $1.36 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Socket, Front; Bulb Socket; Socket Headlamp; Headlight Socket
- Position: Front
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN142069
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Socket, Front Part Number: MN142065
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Socket, Front; Bulb Socket; Socket Headlamp; Headlight Socket
- Position: Front
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN142065
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2003 Chrysler Sebring Headlight Bulb Parts and Q&A

Q: How to Replace a Headlight Bulb on 2003 Chrysler Sebring?
A: Remove the battery negative cable from the headlamp before you replace the bulb in the export model. After loosening the retaining screws on the headlamp unit, remove it to see the back. Take out the connection clips from the power supply and pull back on the protective rubber seal of the headlamp. Pop the headlamp bulb retaining clip out of its socket, followed by pulling the headlamp bulb from the unit. For installation, put the new bulb into the headlamp mount and hold it in place with the retaining clip. Place the rubber boot on, link the wire connector back to the headlamp and mount the headlamp. Lastly, attach the headlamp seals to the retaining screws and link the negative battery cable.