How to Service and Repair Headlight Bulbs on Chrysler Sebring?

Start the headlamp bulb service and repair by positioning the high beams in the front lamp unit and then twisting and holding the bulb clockwise a quarter turn, following the electrical cable to the battery negative attachment afterward. On the front lamp unit, set the low beam bulb so it faces forward, grip the rear of the bulb, rotate it a quarter turn clockwise and plug in the electrical connector. Move the power distribution center into a new place, fasten it into the bracket and slide the air intake housing over to the side. Attach the retaining bolt and link the air intake sensor together, after which loosen and ease the air intake housing to one side before attaching the negative cable back to the battery. For the low beam on the passenger side, set the headlamp bulb in the front lamp unit, hold the bulb, rotate the headlamp bulb counterclockwise a quarter turn and connect the headlamp bulb electrical cable to the negative of the battery. The turn signal and side marker require the following: place the bulb in the front, turn it clockwise a quarter turn on its socket, connect the electrical connector and reinstall the battery negative cable.

How to Replace a Headlight Bulb Safely on Chrysler Sebring?

The first step to replacing the headlamp bulb is to disconnect and isolate the car's battery negative cable. Loosen the screws holding the headlamp unit in place and take it out to access what's at the back. Disconnect the wire connector from the back of the bulb in the headlamp, then turn the retaining ring counterclockwise and take it off. Pull the headlamp bulb out of the unit. To install the new bulb, slide it into the headlamp unit and make sure it's secure with the retaining ring which you turn clockwise. Attach the wire connector back to the bulb, reassemble the headlamp and hold it in place with the screws supplied. Go ahead and put on the negative battery cable after everything else is reconnected.

OEM Chrysler Sebring Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Headlight Bulbs found

View related parts
Chrysler Sebring Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
- 2001-2003 Chrysler Sebring | 2.4L L4, 2.7L V6
- 1999 Chrysler Sebring | 2.4L L4, 2.5L V6
- 1996 Chrysler Sebring | 2.4L L4, 2.5L V6
View More
View related parts
Chrysler Sebring Marker Lamp Bulb Part Number: L00194NA
$6.21 MSRP: $9.05
You Save: $2.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Side Marker Light Bulb; Clearance Light Bulb; Turn Signal Bulbs; Car Bulbs; Roof Lamp Bulb; Bulb 194Na Exterior; Bulb 194Na
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Sebring | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Headlamp Bulb, Front Part Number: L0009005
$25.20 MSRP: $37.00
You Save: $11.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; High Beam Bulb; Headlamps; Composite Bulb; Lower Beam Bulb; Exterior Bulbs.
- Position: Front
- Replaces: MS820959
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring
- 1995-2000 Chrysler Sebring | 2.0L L4, 2.5L V6
View related parts
Chrysler Sebring Headlamp Bulb, Front Part Number: L0009007QL
$24.35 MSRP: $35.75
You Save: $11.40 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Roof Lamp Bulb; Bulb; Bulb Headlamp
- Position: Front
- Replaces: MS820973, 154882AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2005 Chrysler Sebring | Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 2.4L L4, 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bulb & Socket, Front Part Number: L0009006
$26.50 MSRP: $38.95
You Save: $12.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Fog Light Bulb; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; Headlamp Bulb; High Beam, Roof, Fog, Lower Beam, Composite Bulbs; Bulb 9006; Headlight.
- Position: Front
- Replaces: 5096939AA, MS820960
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring
- 1995-2003 Chrysler Sebring | 2.0L L4, 2.5L V6
View related parts
Chrysler Sebring Turn Signal Bulb Part Number: 68604853AA
$12.60 MSRP: $18.45
You Save: $5.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Backup Lamp Bulb; Signal Lamp Bulb; Marker Lamp Bulb; Exterior Bulbs; Stoplamp Bulb; Taillamp Bulb; Bulbs
- Replaces: L0003757AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler Sebring | Base, LX, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
- 2001-2004 Chrysler Sebring | 2.4L L4, 2.7L V6
View related parts
Chrysler Sebring Headlamp Bulb, Front Part Number: L0009006XS
$17.93 MSRP: $26.35
You Save: $8.42 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; High Beam Bulb; Lower Beam Bulb; Bulb Headlamp 9006Xs; Bulb Headlamp
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Headlamp Bulb Part Number: 68604855AA
$29.76 MSRP: $44.10
You Save: $14.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; High Beam Bulb
- Replaces: L0000H13
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Sebring | Base, GTC, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Bulb - Headlamp Part Number: 68604860AA
$35.74 MSRP: $48.70
You Save: $12.96 (27%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: HEADLAMP
- Replaces: L0000H11, 68129022AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Socket, Front Part Number: MN142069
$5.12 MSRP: $6.48
You Save: $1.36 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Socket, Front; Bulb Socket; Socket Headlamp; Headlight Socket
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Socket, Front Part Number: MN142065
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Socket, Front; Bulb Socket; Socket Headlamp; Headlight Socket
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Sebring | LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Chrysler Sebring Headlight Bulb

Choose OEM Headlight Bulb that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Headlight Bulb follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Headlight bulbs are important in Chrysler Sebring automobiles mainly because of their function by providing sufficient light when driving at night. In the models of Sebring over the years, he said, various headlight bulbs have been used such as Halogen and HID (High Intensity Discharge) bulbs. The halogen bulbs, which have tungsten filament, offer standard and enhanced types with up to 50% chance of brightness in order to offer improved visibility. HID bulbs produce light through the use of an arc between two electrodes, however, the brightness of HID bulbs decreases and they suffer from cycling problems after some time. However, for those car owners who consider getting superior performance, Chrysler Sebring owners can purchase LED headlight conversion kits. These bulbs provide much better illumination and are designed for durability - as a rule, they are much longer-lasting than the traditional Halogen and HID bulbs. Also, LED kits work both with reflector and projector beam, which makes their use appropriate to improve the Sebring's lighting.

Chrysler Sebring Headlight Bulb Parts and Q&A

Bulb & Socket, Front
L0009006
Q: How to Service and Repair Headlight Bulbs on Chrysler Sebring?
A:
Start the headlamp bulb service and repair by positioning the high beams in the front lamp unit and then twisting and holding the bulb clockwise a quarter turn, following the electrical cable to the battery negative attachment afterward. On the front lamp unit, set the low beam bulb so it faces forward, grip the rear of the bulb, rotate it a quarter turn clockwise and plug in the electrical connector. Move the power distribution center into a new place, fasten it into the bracket and slide the air intake housing over to the side. Attach the retaining bolt and link the air intake sensor together, after which loosen and ease the air intake housing to one side before attaching the negative cable back to the battery. For the low beam on the passenger side, set the headlamp bulb in the front lamp unit, hold the bulb, rotate the headlamp bulb counterclockwise a quarter turn and connect the headlamp bulb electrical cable to the negative of the battery. The turn signal and side marker require the following: place the bulb in the front, turn it clockwise a quarter turn on its socket, connect the electrical connector and reinstall the battery negative cable.
Headlamp Bulb, Front
L0009007QL
Q: How to Replace a Headlight Bulb Safely on Chrysler Sebring?
A:
The first step to replacing the headlamp bulb is to disconnect and isolate the car's battery negative cable. Loosen the screws holding the headlamp unit in place and take it out to access what's at the back. Disconnect the wire connector from the back of the bulb in the headlamp, then turn the retaining ring counterclockwise and take it off. Pull the headlamp bulb out of the unit. To install the new bulb, slide it into the headlamp unit and make sure it's secure with the retaining ring which you turn clockwise. Attach the wire connector back to the bulb, reassemble the headlamp and hold it in place with the screws supplied. Go ahead and put on the negative Battery Cable after everything else is reconnected.