How to Service and Repair a Transmission Speed Sensor for Output on 2003 Chrysler Sebring?

Before servicing the Transmission Speed Sensor, remove the negative terminal on the battery and lift up the vehicle using a hoist. Then, take off the output speed sensor's connector and unscrew the sensor and if you see any damage to the O-ring, replace it. Before installing, check that the O-ring is aligned, then fix and tighten the input speed sensor to 27 Nm (20 ft. lbs.). After that, hook up the speed sensor connector and the negative battery cable.

OEM 2003 Chrysler Sebring Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2003 Chrysler Sebring Vehicle Speed Sensor Part Number: 4707839AA
$67.79 MSRP: $102.00
You Save: $34.21 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Vehicle Speed; Speedometer Sensor; Sensor Vehicle Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.6 x 1.8 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4707839AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, LX, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2003 Chrysler Sebring Speed Sensor Part Number: 4800879
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Vehicle Speed Sensor; Speedometer Sensor; Input Sensor; Output Sensor; Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 1.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4800879
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2003 Chrysler Sebring Speed Sensor Parts and Q&A

Q: How to Service and Repair a Transmission Speed Sensor for Output on 2003 Chrysler Sebring?
A: Before servicing the Transmission Speed Sensor, remove the negative terminal on the battery and lift up the vehicle using a hoist. Then, take off the output speed sensor's connector and unscrew the sensor and if you see any damage to the O-ring, replace it. Before installing, check that the O-ring is aligned, then fix and tighten the input speed sensor to 27 Nm (20 ft. lbs.). After that, hook up the speed sensor connector and the negative battery cable.