How to Service and Repair a Transmission Speed Sensor for Input on 2004 Chrysler Sebring?

Before starting on the sensor, you should remove the battery negative cable. Should you need to, you should disconnect and cap off the transmission oil cooler lines. After that, remove the input speed sensor connector and unscrew the input speed sensor. If the O-ring on the speed sensor is worn, change it. While setting up, place the O-ring in the correct spot, then put in the input speed sensor and tighten it to 27 Nm (20 ft. lbs.). Connect the speed sensor wire and then replace the battery negative wire.

OEM 2004 Chrysler Sebring Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
2004 Chrysler Sebring Vehicle Speed Sensor Part Number: 4707839AA
$67.79 MSRP: $102.00
You Save: $34.21 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Vehicle Speed; Speedometer Sensor; Sensor Vehicle Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.6 x 1.8 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4707839AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Speed Sensor Part Number: 4800879
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Vehicle Speed Sensor; Speedometer Sensor; Input Sensor; Output Sensor; Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 1.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4800879
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chrysler Sebring Vehicle Speed Sensor Part Number: MR534577
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Sensor Transmission Output Speed
- Replaces: MR534576, 8651A110
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 2.0 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR534577
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base | 4 Cyl 2.4 L GAS

2004 Chrysler Sebring Speed Sensor Parts and Q&A

Q: How to Service and Repair a Transmission Speed Sensor for Input on 2004 Chrysler Sebring?
A: Before starting on the sensor, you should remove the battery negative cable. Should you need to, you should disconnect and cap off the transmission oil cooler lines. After that, remove the input speed sensor connector and unscrew the input speed sensor. If the O-ring on the speed sensor is worn, change it. While setting up, place the O-ring in the correct spot, then put in the input speed sensor and tighten it to 27 Nm (20 ft. lbs.). Connect the speed sensor wire and then replace the battery negative wire.