How to service an Oil Pressure Switch on 2003 Chrysler Voyager?

To service the oil pressure sender, jack up a vehicle and place an oil container under the switch. Disconnect from the electrical connector, remove the switch and set up another, torque it up to 21 Nm. Reconnect electrical connector, lower vehicle and start engine for 2 minutes and check oil level.

OEM 2003 Chrysler Voyager Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2003 Chrysler Voyager Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Chrysler Voyager Submodels:
- Base, Ec, LX, SE | 2.4L L4, 3.3L V6, 3.8L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2003 Chrysler Voyager Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2003 Chrysler Voyager?
A: To service the oil pressure sender, jack up a vehicle and place an oil container under the switch. Disconnect from the electrical connector, remove the switch and set up another, torque it up to 21 Nm. Reconnect electrical connector, lower vehicle and start engine for 2 minutes and check oil level.