How to Service a Dimmer Switch on 2003 Dodge Caravan?

The turn signal switch should first be serviced by disconnecting the negative battery cable from the battery. After that, clear away the upper and lower shrouds from the steering column. Unplug the wire connector from the switch in the back and loosen the screws holding the switch to the steering column adapter collar. Attach the switch onto the center of the steering column; after which, fit the two retaining screws. Lift the steering wheel slightly, fit the wire harness connector and then put the upper and lower shrouds on the steering column again. In the end, attach the black battery cable back to the vehicle.

OEM 2003 Dodge Caravan Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2003 Dodge Caravan Multifunction Switch Part Number: 4685711AC
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Multi Purpose Switch; Combination Switch
- Replaces: 4685711AB, 4685711AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.0 x 4.8 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685711AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Caravan Submodels:
- Base, C/V, Ec, SE, SXT, Sport | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2003 Dodge Caravan Dimmer Switch Parts and Q&A

Q: How to Service a Dimmer Switch on 2003 Dodge Caravan?
A: The turn signal switch should first be serviced by disconnecting the negative battery cable from the battery. After that, clear away the upper and lower shrouds from the steering column. Unplug the wire connector from the switch in the back and loosen the screws holding the switch to the steering column adapter collar. Attach the switch onto the center of the steering column; after which, fit the two retaining screws. Lift the steering wheel slightly, fit the wire harness connector and then put the upper and lower shrouds on the steering column again. In the end, attach the black battery cable back to the vehicle.