How to Replace a CV Boot on the Inner Constant Velocity Joint on 2003 Dodge Intrepid?

In order to change the inner constant velocity joint boot, take the halfshaft assembly off, toss out the clamps and pull off the boot. Disassemble the spider joint, clean the parts and wear inspection. Install new boot and spider, put on grease and reassemble everything and then replace the halfshaft.

OEM 2003 Dodge Intrepid CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 CV Boots found

View related parts
2003 Dodge Intrepid Boot Kit Part Number: 4863722
Product Specifications
- Other Name: Boot - Half Shaft; CV Boot; Outer Boot; Boots; Boot Kit Half Shaft Outer
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.4 x 6.4 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4863722
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Dodge Intrepid Inner Boot Part Number: 4728261
Product Specifications
- Other Name: Boot - Halfshaft; CV Boot; Boot Kit Half Shaft Inner; Boot Package, Inner C.V.
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.5 x 6.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4728261
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2003 Dodge Intrepid CV Boot Parts and Q&A

Q: How to Replace a CV Boot on the Inner Constant Velocity Joint on 2003 Dodge Intrepid?
A: In order to change the inner constant velocity joint boot, take the halfshaft assembly off, toss out the clamps and pull off the boot. Disassemble the spider joint, clean the parts and wear inspection. Install new boot and spider, put on grease and reassemble everything and then replace the halfshaft.