How to Replace a Tail Light on 2003 Dodge Neon?

Removing the tail lamp, the negative cable of the battery has to be disconnected and the trunk lining has to be moved so that the tail lamp is exposed. Take out the bulb socket, bulb and put a new bulb in the socket. Install the socket, re-fit the trunk lining and re-connect the cable of the battery.

OEM 2003 Dodge Neon Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tail Lights found

View related parts
2003 Dodge Neon Combination Lamp Assy, Rear Driver Side Part Number: 5288527AM
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Left; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Rear Driver Side
- Replaces: 5288527AL
- Item Weight: 3.30 Pounds
- Item Dimensions: 22.7 x 13.5 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5288527AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- R/T, SE, SRT-4, SXT | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Combination Lamp Assy, Rear Passenger Side Part Number: 5288526AM
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Right; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Rear Passenger Side
- Replaces: 5288526AL
- Item Weight: 3.20 Pounds
- Item Dimensions: 22.2 x 13.9 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5288526AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- R/T, SE, SRT-4, SXT | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2003 Dodge Neon Tail Light Parts and Q&A

Q: How to Replace a Tail Light on 2003 Dodge Neon?
A: Removing the tail lamp, the negative cable of the battery has to be disconnected and the trunk lining has to be moved so that the tail lamp is exposed. Take out the bulb socket, bulb and put a new bulb in the socket. Install the socket, re-fit the trunk lining and re-connect the cable of the battery.