How to Maintain a Speed Sensor on the Rear Wheel on 2003 Dodge Ram 2500?

You should start by lifting the vehicle with a hoist when servicing the rear wheel speed sensor. Refrain from needing to use a new gasket, since it was difficult to replace. You'll now want to extract the sensor and shield from the rest of the system by simply taking the mounting stud from them both and then setting them aside. Remove the wires and then remove the sensor. When you connect the harness, be sure to seal the sensor to the wiring by placing the seal between them. Warning: Do not remove the O-ring! Replace the sensor in the differential housing and go on to set up the sensor shield. Tighten the sensor mounting stud to 24 Nm (200 in. lbs.) first, then reinstall the brake line onto the stud and tighten the sensor nut. To finish, bring down the vehicle.

OEM 2003 Dodge Ram 2500 Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2003 Dodge Ram 2500 Vehicle Speed Sensor Part Number: 4799061AB
$42.22 MSRP: $60.70
You Save: $18.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4799061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2003 Dodge Ram 2500 ABS Sensor, Rear Part Number: 56028187AE
$64.56 MSRP: $96.75
You Save: $32.19 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear; Vehicle Speed Sensor; Speed Sensor; Rear Speed Sensor; Sensor Wheel Speed; ABS Wheel Speed Sensor
- Position: Rear
- Replaces: 56028187AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028187AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
2003 Dodge Ram 2500 Speed Sensor Part Number: 4800879
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Vehicle Speed Sensor; Speedometer Sensor; Input Sensor; Output Sensor; Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 1.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4800879
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Base, Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Ram 2500 ABS Sensor Part Number: 5093834AB
Product Specifications
- Other Name: Sensor - Wheel Speed; Front Speed Sensor
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.0 x 6.7 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093834AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS

2003 Dodge Ram 2500 Speed Sensor Parts and Q&A

Q: How to Maintain a Speed Sensor on the Rear Wheel on 2003 Dodge Ram 2500?
A: You should start by lifting the vehicle with a hoist when servicing the rear wheel speed sensor. Refrain from needing to use a new gasket, since it was difficult to replace. You'll now want to extract the sensor and shield from the rest of the system by simply taking the mounting stud from them both and then setting them aside. Remove the wires and then remove the sensor. When you connect the harness, be sure to seal the sensor to the wiring by placing the seal between them. Warning: Do not remove the O-ring! Replace the sensor in the differential housing and go on to set up the sensor shield. Tighten the sensor mounting stud to 24 Nm (200 in. lbs.) first, then reinstall the brake line onto the stud and tighten the sensor nut. To finish, bring down the vehicle.