How to Properly Service and Repair a Front Brake Caliper Without Damaging the Brake Hose on 2003 Dodge Ram 2500?

Before servicing the caliper, make sure it is being supported so the brake hose does not get damaged. Brace the brake pedal with a prop rod to maintain stopping force in the brakes before you raise the vehicle. Take out the tire and wheel first, press the disc brake caliper and then remove the banjo bolt, throwing away the copper washer. After that, extract the caliper slide pin bolts and take off the disc brake caliper. For the caliper installation, put fresh silicone or rubber washers on the banjo bolt, set the disc brake caliper in place and don't twist the brake hose as you tighten the fitting. Fasten the banjo bolt using two new copper washers against the caliper, then tighten it to 27 Nm (20 ft. lbs.) Next, tighten the slide pin bolts to 32 Nm (24 ft. lbs.). After setting aside the prop rod, bleed the base brake system, fit the tire and wheel and lower the car to the ground.

OEM 2003 Dodge Ram 2500 Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2003 Dodge Ram 2500 Caliper, Rear Driver Side Part Number: 5104759AA
$348.50 MSRP: $513.00
You Save: $164.50 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Caliper Disc Brake; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 13.10 Pounds
- Item Dimensions: 6.0 x 10.6 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104759AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2003 Dodge Ram 2500 Caliper, Front Passenger Side Part Number: 5093266AA
$157.91 MSRP: $232.00
You Save: $74.09 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 15.20 Pounds
- Item Dimensions: 10.1 x 7.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093266AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2003 Dodge Ram 2500 Caliper, Rear Passenger Side Part Number: 5093263AB
$370.60 MSRP: $564.00
You Save: $193.40 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 5093263AA
- Item Weight: 13.30 Pounds
- Item Dimensions: 10.3 x 7.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093263AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2003 Dodge Ram 2500 Caliper, Rear Driver Side Part Number: 5093264AB
$427.80 MSRP: $564.00
You Save: $136.20 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Brake Caliper
- Position: Rear Driver Side
- Replaces: 5093264AA
- Item Weight: 13.30 Pounds
- Item Dimensions: 10.0 x 7.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093264AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2003 Dodge Ram 2500 Caliper, Front Driver Side Part Number: 5093269AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Item Weight: 14.30 Pounds
- Item Dimensions: 5.2 x 7.7 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093269AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2003 Dodge Ram 2500 Caliper, Rear Passenger Side Part Number: 5104758AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Caliper Disc Brake; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 12.80 Pounds
- Item Dimensions: 6.6 x 6.4 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104758AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2003 Dodge Ram 2500 Brake Caliper Parts and Q&A

Q: How to Properly Service and Repair a Front Brake Caliper Without Damaging the Brake Hose on 2003 Dodge Ram 2500?
A: Before servicing the caliper, make sure it is being supported so the brake hose does not get damaged. Brace the brake pedal with a prop rod to maintain stopping force in the brakes before you raise the vehicle. Take out the tire and wheel first, press the disc brake caliper and then remove the banjo bolt, throwing away the copper washer. After that, extract the caliper slide pin bolts and take off the disc brake caliper. For the caliper installation, put fresh silicone or rubber washers on the banjo bolt, set the disc brake caliper in place and don't twist the brake hose as you tighten the fitting. Fasten the banjo bolt using two new copper washers against the caliper, then tighten it to 27 Nm (20 ft. lbs.) Next, tighten the slide pin bolts to 32 Nm (24 ft. lbs.). After setting aside the prop rod, bleed the base brake system, fit the tire and wheel and lower the car to the ground.