Other Name: Module - ABS; ABS Control Module; Modulator Valve; Module Anti-Lock Brakes
Replaces: 5017705AA, 5018422AA, 5018422AB
Item Weight: 2.30 Pounds
Item Dimensions: 10.0 x 7.5 x 5.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5018422AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Dodge Ram 3500 Van Submodels:
Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
2003 Dodge Ram 3500 Van ABS Control Module Parts and Q&A
Q: How to service and repair the ABS Control Module on 2003 Dodge Ram 3500 Van?
A: First, you should disconnect the two battery cables and move the battery out of the way. After that, remove the distribution center and its holder, then unscrew the washer reservoir mount parts. Lift the reservoir and unconnect the connector to the pump motor and remove the hose. Loosen the connectors you secured and take them out of the CAB, also pulling the connector to disconnect the power to the pump motor. Open the CAB's screws that are attached to the HCU and lift the CAB out. During installation, put the CAB onto the HCU and line up the CAB seal. Attach the mounting screws, then tighten them to 4.4 Nm (39 in. lbs.) and link the pump motor's harness and the wiring harnesses to CAB and lock the connections. Attach the reservoir again to the engine compartment, fit the pump motor connector, connect the pump hose and screw the washer reservoir in place. Reinstall the battery and the mount, power distribution center and connect the cables to the battery. Replace program the axle type and the revolutions each tire makes per mile into the new computer.