How to remove and install the MAP sensor on the throttle body on 2003 Dodge Ram 3500 Van?

The steps to get rid of the MAP sensor include the removal of the air cleaner and engine cover, disconnection of the electrical connector, and extraction of two bolts. Slide the rubber fitting, and remove sensor. To install, reverse, make sure fitting is fixed and bolts are tightened to 3 Nm (25 in. lbs.).

OEM 2003 Dodge Ram 3500 Van MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2003 Dodge Ram 3500 Van M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Ram 3500 Van MAP Sensor Parts and Q&A

Q: How to remove and install the MAP sensor on the throttle body on 2003 Dodge Ram 3500 Van?
A: The steps to get rid of the MAP sensor include the removal of the air cleaner and engine cover, disconnection of the electrical connector, and extraction of two bolts. Slide the rubber fitting, and remove sensor. To install, reverse, make sure fitting is fixed and bolts are tightened to 3 Nm (25 in. lbs.).