Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM Dodge Ram 3500 Van MAP Sensor

Manifold Air Pressure Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

  • Dodge Ram 3500 Van MAP Sensor - 56029405
    Dodge Ram 3500 Van MAP Sensor - 56029405
    Dodge Ram 3500 Van MAP Sensor - 56029405
    Dodge Ram 3500 Van MAP Sensor - 56029405
    Dodge Ram 3500 Van MAP Sensor Diagram - 56029405
    View related parts

    Dodge Ram 3500 Van M.A.P. Sensor Part Number: 56029405

    Product Specifications
    • Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1999-2003 Dodge Ram 3500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 3500 Van MAP Sensor

Choose OEM MAP Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 Van matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 Van parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 3500 Van MAP Sensor Parts and Q&A

  • Dodge Ram 3500 Van MAP Sensor - 56029405 M.A.P. Sensor M.A.P. Sensor
    56029405
    Q: How to remove and install the MAP sensor on the throttle body on Dodge Ram 3500 Van?
    A:
    On the front of the throttle body is where you'll find the MAP sensor and it's attached with an L-shaped rubber connection. Before removing the sensor, take off the engine cover and air cleaner assembly and afterwards disconnect its electrical connector. After that, unscrew the two bolts holding the MAP sensor and pull the vacuum rubber L-shaped fitting from the throttle body when you remove the sensor. Pull out the rubber fitting that is attached to the MAP sensor. During installation, put the rubber L-shaped attachment on the MAP sensor and make sure the sensor is over the throttle body, with the fitting covering the vacuum nipple on the throttle body. Attach the MAP sensor to the mounting bolts and tighten them by hand to 3 Nm or 25 in. lbs. After that, reinstall the electrical connector, then the air cleaner and engine cover.

Related Dodge Ram 3500 Van Parts

Browse Dodge Ram 3500 Van MAP Sensor by Years

+
2003 2002 2001 2000 1999